p%26a trondheim
Photo: SINTEF Petroleum


Experimental P&A research for the North Sea

31.05.2017

The latest within P&A research and development (R&D) was revealed in Trondheim between 20-21 march.

The latest within P&A research and development (R&D) was revealed in Trondheim between 20-21 march.   
SINTEF Petroleum hosted the conference where the emphasis was “the importance of relevant experimental R&D for ensured well integrity and P&A related cost reductions,” according to their website.

Approximately 160 people attended the conference that consisted of 24 presentations, a tour of SINTEF’s laboratory facilities and a panel debate at the very end. The entire program can be found here.

Maria Barrio Hernandez, senior business developer at SINTEF, helped arrange the conference.

- We are very pleased that almost 160 people from 75 different companies attended the conference. Also, we received genuine positive feedback, and participants were particularly pleased that we included topics like nuclear waste storage and CO2 in a P&A-setting.

Sigmund Stokka, research director at IRIS and manager of DrillWell, and Dave Gardner, senior project manager at IRIS/DrillWell, presented some of their research on the second day of the conference. Arild Aarrestad and Frank Michael Mortensen from IRIS also joined the conference.

Stokka’s presentation,” Can tubing be left in the hole” (SPE 178840), explained how conventional and expanding cement have been tested to determine the sealing ability of annulus cement when tubing is left in the hole. The presentation raised several interesting questions from the audience. One of them was if it is possible to monitor the well in a long-term setting. To which Stokka replied.

- No. For it to be feasible a cable would need to run from the well and all the way to the top. Also, a system to facilitate the data would have to be incorporated. This is not something we have focused on. 

sigmund confer
Photo 1: Sigmund Stokka, research director at IRIS and manager of DrillWell. Photo: IRIS.

Gardner, who had the penultimate presentation of the conference, “Cement barrier evaluation lab”, talked about establishing reference conditions for cement (barrier) logging and experiments conducted to investigate the relationship between cement evaluation techniques and quality of sealing materials.

- I think the quality of the conference was very good and covered a lot of topics, Gardner said.

dave-conference
Photo 2: Dave Gardner, senior project manager at IRIS/DrillWell. Photo: IRIS. 


Before the conference dinner on the first day of the conference, a tour of SINTEF’s laboratory facilities was arranged for several of the participants. Some of what was on display was a flow loop that can be used for pipe pulling experiments and studies of perforate-wash-cement operations. More information about the laboratory tour is found attached to the pictures below. 

Lab tour

lab-tour1 rs1
Photo 3: Left, Sigurd Bakheim, senior engineer, SINTEF. Right, Jørn Stenebråten, research manager, SINTEF. Photo: IRIS.

Sigurd and Jørn presented the laboratory setup for research on the “shale as a barrier” (how shale can be utilized as a natural barrier against the casing) concept. In the setup, a shale-sample (with an aluminum-core in the middle that measures stress upon contact) is subjected to different temperatures and pressures. The objective is to find out which types of shales, and under which circumstances, they collapse and creep towards the casing. Another aspect is to check the sealing-ability of the shale, the researchers told the participants during the tour.    

lab-tour2
Photo 4: Left, Ragnhild Skorpa, research scientist, SINTEF. Photo: IRIS.

Ragnhild demonstrated how temperature cycling in a simulated cased and cemented well is used to find out how this affects adhesion between casing-cement-rock. Variations in temperature will lead to varying degrees of casing, cement and rock expansion due to different expansion properties. Variations in temperature occur downhole during shutdown, water injection and production to name just a few reasons, Ragnhild explained the participants during the tour.   

lab-tour3
Photo 5: Ali Taghipour, researcher, SINTEF. Photo; IRIS. 

Ali demonstrated the flow loop or “casing wash and retrieval” lab, which it is called. Flow in different angles and wellbore geometries (rifled vs circular) are investigated. Mudflow and cuttings transport under different circumstances are also investigated, Ali informed the participants on the tour.  














 
New Book: Introduction to Permanent Plug and Abandonment of Wells
>Read more

DrillWell Final Report
>Read more

Focus on digitalization technologies and P&A operations
>Read more

DrillWell Seminar 2019 - open for registration
>Read more

DrillWell Annual Report 2018
>Read more

SPE/IADC Drilling Conference 2019
>Read more

Well in line with industry challenges
>Read more

DrillWell makes a difference
>Read more

Erich Suter managed his phD-Defense successfully
>Read more

DrillWell Seminar 2018 - Open for Registration
>Read more

Epic fourth colloquium at the Pulpit Rock
>Read more

DrillWell Annual Report 2017
>Read more

FUNDING OPPORTUNITY FOR MOBILITY AND COURSES IN DATA SCIENCE IN 2018
>Read more

OTC 2018 NorTex Data Science Cluster Workshop
>Read more

SPE/IADC Drilling Conference 2018
>Read more

3D model validation
>Read more

Meet a DrillWell Researcher
>Read more

Reza Askarinezhad defended his Ph.D. thesis
>Read more

FRIPRO Mobility Grant
>Read more

Cementing experiments
>Read more

DRILLWELL AT SPE WORKSHOP ON WELL INTEGRITY IN CANADA
>Read more

Successful playback of data from Ivar Aasen
>Read more

New safe artificial rock for plug and abandonment
>Read more

DRILLING DATA HUB DEMONSTRATION
>Read more

DRILLWELL TECHNICAL SEMINAR 2017
>Read more

Recorded webinar
>Read more

Rice 2017 Data Science Conference
>Read more

DrillWell technical seminar - day two
>Read more

DrillWell technical seminar - day one
>Read more

The annual DrillWell conference Sept 26-27
>Read more

GREAT RESULTS AT DRILLBOTICS 2017
>Read more

DrillWell at OMAE 2017
>Read more

OFFSHORE TECHNOLOGY CONFERENCE 2017
>Read more

Experimental P&A research for the North Sea
>Read more

SPE/IADC Drilling Conference 2017
>Read more

The great drilling automation debate
>Read more

Experimental P&A research for the North Sea
>Read more

Cement evaluation test facility
>Read more

University of Stavanger has made it to the final round in the Drillbotics competition
>Read more

Register for OTC 2017 NorTex Data Science Cluster Workshop
>Read more

Visit to UBC in Vancouver
>Read more

New experimental insights on cement displacement
>Read more

A travelogue from a DrillWell postdoc
>Read more

3D-prints flowrate sensor prototype
>Read more

Meet PhD student Riisøen
>Read more

DrillWell Technical seminar – day 2
>Read more

DrillWell Technical seminar - day 1
>Read more

​Project development at NorTex
>Read more

PhD on Optimization of Well Placement
>Read more

Risk of leakage as measurement for quality in P&A solutions
>Read more

New PhD in DrillWell
>Read more

DrillWell seminar September 27&28
>Read more

Get ready for ONS 2016!
>Read more

UT Austin researchers at IRIS
>Read more

More precise guidelines for hole cleaning
>Read more

Site Visit by the Research Council
>Read more

Focus on Data for Drilling Automation
>Read more

DrillWell PhD thesis defended
>Read more

DrillWell results presented and discussed at mini seminar
>Read more

DrillWell presented at OTC
>Read more

SPE/IADC Drilling Conference 2018
>Read more

20 million to drilling project
>Read more

NorTex Data Science Cluster Workshop: Plug & Abandonment
>Read more

Two NorTex workshops at OTC 2016
>Read more

DrillWell at SPE One-day in Bergen
>Read more

DrillWell Annual Report 2015
>Read more

Visit from DTU in Copenhagen
>Read more

DrillWell represented at SPE Symposium in Banff, Canada
>Read more

Green light for the next three years
>Read more

Two new Petromaks2 projects supported by the DrillWell consortium
>Read more

Transient cuttings transport model draws attention
>Read more

First DrillWell PhD dissertation
>Read more

Artikkel i Teknisk Ukeblad 12.11.2015:
>Read more

INTPART-funding to “NorTex Data Science Cluster”
>Read more

Vacant position: Research Fellow in Drilling Engineering
>Read more

The annual DrillWell technical seminar - Day 2
>Read more

The annual DrillWell technical seminar – Day 1
>Read more

Sharing knowledge is the new power
>Read more

Well log interpretation: Will the machines take over our jobs?
>Read more

DrillWell at OMAE 2015 conference in Canada
>Read more

The 1st DrillWell newsletter
>Read more

INTSOK UK-Norway network meeting
>Read more

Collaboration with the new SFI in Agder
>Read more

ROP Management results presented to Statoil
>Read more

DrillWell at SPE Bergen One Day Seminar
>Read more

NPF presentation in Stavanger
>Read more

Lundin joins DrillWell
>Read more

DrillWell paper in Journal of Petroleum Technology
>Read more

SPE/IADC Drilling Conference
>Read more

The 2014 IADC Well Control Conference Europe
>Read more

Paper in JPT Journal
>Read more

DrillWell annual seminar
>Read more

DrillWell present at NPF's Drilling and Well Conference
>Read more

DrillWell at ONS2014
>Read more

Tubing left in hole test
>Read more

SPE Intelligent Energy Conference
>Read more

Tubing left in hole test
>Read more